DirtMechanic
Full Access Member
- Joined
- Oct 8, 2017
- Messages
- 7,385
- Reaction score
- 5,394
- Location
- Birmingham, AL USA
- Hardiness Zone
- 8a
- Country

Spreaders, those useful machines, have no standards. The prills in the bags has no stated size and the the machines have a dial that is meaningless in terms of the different size particles (prills) it drops. What would you change? It looks like the particle size to hole opening ration needs to be observed by us. In the pic notice the size not show of the hole roughly 25mm by 26mm x4.
And that was my pusher so here is my puller spreader. 3.5" x 1.25 inch roughly in one large hole.
and the puller rotates at a 5 basket to 1 wheel rotation. the pusher rotates at a 5 to one wheel rotation as well.
So one machine 15 and the other 10 on the settings.. What would you doctors prescribe?
And that was my pusher so here is my puller spreader. 3.5" x 1.25 inch roughly in one large hole.
and the puller rotates at a 5 basket to 1 wheel rotation. the pusher rotates at a 5 to one wheel rotation as well.
So one machine 15 and the other 10 on the settings.. What would you doctors prescribe?
Attachments
Last edited:

