10 November 2016 Whole Wheat Bread

Joined
Dec 11, 2014
Messages
2,787
Reaction score
1,120
Location
Brantford,ON
Showcase(s):
3
Hardiness Zone
Zone 5
Country
Canada
10 November 2016 Whole Wheat Bread
I buy wheat grains and grind them into flour. After experimenting making various whole wheat bread, it appears I have finally got a working recipe. Taken off the internet. This is my first attempt at making bread using the chosen recipe. The loaves are not perfectly shaped but have good texture, excellent flavor, and are acceptable. A few minor adjustments and they will be perfect.
http://durgan.org/2016/November%202016/10%20November%202016%20Whole%20Wheat%20Bread/HTML/ 10 November 2016 Whole Wheat Bread
dsc_5032_std.jpg


The Recipe:
http://www.food.com/recipe/100-whole-grain-wheat-bread-181106 100% Whole Grain Wheat Bread
Prep Time: 30 mins
Total Time: 3 hrs 15 mins
Serves: 24, Yield: 2 Loaves
About This Recipe

“If you like fluffy brown bread this is it. No white flour here. You can use any 100% whole grain wheat flour. I mill my own. This bread is not heavy like most 100% whole wheat breads. If it is you used too much flour and your dough was too stiff. If it flattens out and won’t stand up you need more flour. The total amount of flour is usually about 6 1/2 to 7 cups. This recipe has been in my family for years and we all make it. We make a lot more now that we have powerful mixers and the hand kneading is bye bye.”
.

Ingredients
2 3/4 cups hot water
1/3 cup olive oil, any oil is fine
1/3 cup honey
2 tablespoons molasses
1 tablespoon salt, Sea Salt is good
7 1/2 cups of 100% whole grain wheat flour
2 tablespoons dry active yeast

Directions
1. Place the first five ingredients in the bowl and mix.
2. Add: 2 Cups 100% Whole Grain Wheat Flour. (to cool the water and end up with warm dough) Mix then add 2 Tbs of Dry Active Yeast. If your not sure about your yeast proof it in a little warm water first.
3. Add: 4 Cups of 100% Whole Grain Wheat Flour.
4. Mix until the consistency is some what even. Then continue to slowly add flour 1/2 Cup at a time until the dough quits sticking to the sides of the bowl. It should be tacky to the touch. The trick is to have enough consistency to stand up with the least amount of flour so the bread will be fluffy. It will most likely be 6 1/2 cups but in any case do not exceed 7 1/2 cups of wheat flour. You can trade one cup of wheat flour for one cup of all purpose white if you wish. Don’t over mix or the bread will be tough.
5. When your dough is finished, leave it in the mixer, cover the bowl and let it rise for about 30-45 minutes. The dough will be larger but it doesn’t need to double.
6. Grease two bread pans with Crisco. You can also flour the pans to reduce sticking.
7. Mix the dough again just enough to knock it down at least close to the original size.

Directions

8. Drop the dough on a floured surface so you can work the dough and shape it. Shape it with your hands to make a nice ball getting enough flour on it so it isn’t sticky. Divide the ball in half and do it again. Shape the loaves by turning the dough under it’s self over and over. When the dough is shaped the sides and ends will be sealed and all you will see is a nice oblong shaped loaf with smooth sides and top. Drop the loaves in your bread pans and let them rise until almost doubled. Bake in a preheated oven at 350 for 36 minutes.

9. When done turn the bread out of the pan to a rack to cool. You can eat it right away (a great time for real butter) don’t wrap it until completely cooled. (Condensation will make it soggy) Put in tinfoil to store on the counter. Enjoy.
 
Last edited:
Joined
Dec 11, 2014
Messages
2,787
Reaction score
1,120
Location
Brantford,ON
Showcase(s):
3
Hardiness Zone
Zone 5
Country
Canada

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Staff online

Members online

Forum statistics

Threads
26,779
Messages
258,246
Members
13,340
Latest member
AidanBH

Latest Threads

Top